Change a Harley Electraglide Motor Mount
The motor mount on the Harley Electraglide is between the engine and the frame at the bottom of the engine connected to a cross-member. To change the motor mount you are going to have to get the Harley up off of the ground using a motorcycle jack. The only other tool that you are going to need will be a ratchet set to remove the bolt that is holding the mount to the frame.
Instructions
1. Lift the Harley up using the motorcycle jack. Don't place the motorcycle jack on the mount when you lift the Harley.
2. Locate the motor mount on the underside of the Harley between the engine and the cross-member. Place the car jack under the engine and raise the engine up to take the weight off the mount.
3. Remove the bolt that is securing the mount to the engine and frame using a ratchet set. Pull the mount out from between the engine and the frame.
4. Slide the new motor mount between the engine and the frame. Insert the securing bolt and tighten the bolt using a ratchet set.
Related Posts:
Test A Starter Solenoid On A Harley
A silent starter solenoid is a sign of solenoid failure.Harley-Davidson motorcycles rely on an electromagnetic solenoid to activate the engine's electric starter motor. When power is applied to th...
Change A Radiator In A Nissan Frontier
Change the radiator in your Nissan Frontier.The radiator in your Nissan Frontier removes heat from the engine block to keep it at a predetermined temperature. A leaking or broken radiator needs to...
Jump Start Your Harley
Jump start a Harley battery with the battery from a car.Like car batteries, motorcycle batteries can need a charge from time to time when they are drained of power. You can jump start a Harley Dav...
