Replacing Interior walls in RV

Water damage to interior walls in RV. It is a cork type board which needs to be replaced and then wallpapered. Where do you find these interior wall panels to buy in order to replace? For the most part the manufacturer of the coach will have the info as to the type,spec.ect of the wall material.However if they no longer are in bus. this can be fun.When doing things like this for my custs. I try to use a fire retard. material of the same thickness.I am blessed with a local lumber and plywood fac. in my town that carries these products.In this area it runs about 70 for a 4x8x1/4 sheet closer to 170 for 1/2 thick.I've rarely seen anything other than hi end class A's run that though. Good Luck Can I ask what year, make, model of this RV? I'm doing this same job on my motorhome. I found some new wallboard at a local RV dealer, but it was the wrong color. The camper manufacturers do not continue to carry this board for more than 2 years. I just picked something close from a new camper at the local dealer and he ordered it for me. Its expensive $ 69.00 a sheet plus freight. He also carries the spray glue to install the board.

Related Posts:

• 
  Replacing interior window sill ledge
  
  Replacing Interior Window Sill / LedgeIs it possible replace the window ledge without removing all the window trim? Can I remove just the skirt and sill and replace it that way? I don't want to ha...
  


• 
  Linoleum shower walls
  
  linoleum shower walls?I cant decide on which shower system I want to use. Tile has its grout issues. Fiberglass scratches and discolors. Even a swanstone shower wall and receptor system still has...
  


• 
  Need to insulate garages cinderblock walls cold bedrooms above
  
  Need to insulate garage's cinderblock walls (cold bedrooms above).Bought an older home (45 yrs), and the attached garage's cinderblock walls are bare (not insulated, studed or sheetrocked); adds t...
  


• 
  Replacing door sensors in an old adt system
  
  Replacing door sensors in an old ADT systemWe have an old ADT Safewatch Plus Entrepreneur hardwired system. The door sensors are getting funky. An ADT tech showed up today, rapped the sensors with...
  


• 
  Replacing current copper pipes with pex tubing and shark bite fittings
  
  Replacing current copper pipes with PEX tubing and shark bite fittings.I am remodeling my bathroom which will include replacing the current tub/shower diverter valve. The current copper pipes are...