You can operate your garage door from the Remote Control, after you've programmed it with your own functions.
The Genie H4000 series is one of the AC powered screw drive garage door openers. The Genie H4000 has built-in safety features, like Safe-T-Stop, Safe-T-Reverse, and ForceGuard Control. However, there are plenty of safety warnings. Pay attention to those while operating this garage door opener. Once the Genie H4000 has been installed, follow the included maintenance and programming instructions to get the most out of the product.
Instructions
1. Program the Remote Control buttons to your particular specifications. Press the Learn Button and the little red light (the Indicator Light) blinks twice per second. Press the Learn Button again and the red light stays lit. If you press the button a third time, the light goes out, which means you have saved your instructions in the Remote Control.
2. Use the Remote Control to open and close the garage door. Press the round central button to move the garage door either up to open or down to close. Press the button again to stop the garage door from moving. If you press the button a third time, the door reverses direction.
3. Adjust the Limit Switches and Force Controls if you're having difficulty opening or closing the garage door. Open the front panel of the Power head and locate the adjusting screws, which are marked either Close to close the door or Open to open the door. Gently turn the screw counterclockwise. Tighten the Limit Switch Set screw.
Tips Warnings
Read through the rest of the operating manual (found in the References section) for more tips and warnings.
Related Posts:
Reset The Genie Excelerator Remote Access
The Genie Excelerator garage door opener uses portable remote controls to open and close the door from your vehicle. When you have multiple people using the garage, it is necessary to have several...
Program An Mvp Garage Door Opener
MVP garage-door openers are motorized devices that open and close your garage door automatically. The doors are operated by a wall-mounted control panel or by a three-button programmable remote co...
Program A Linear Garage Door Opener
Linear garage door openers can be programmed to open and close with the use of a keypad located outside the garage or a remote control. When using the keypad, the user enters a programmed code to...
Program A Craftsman 53778 Remote
Garage door remote controls transmit a specific signal to the receiver inside that garage.Craftsman 53778 remotes are designed to control older Craftsman garage door openers that function using th...
Program Your Garage Door Opener Remote
A garage door opener remote allows you to open or close your garage door with the touch of a single button and without ever having to exit your vehicle. These convenient devices may be obtained fr...
